No you won't need new grips. It's not bad to fit but you are messing near sensitive areas, throttle bodies, air intake and a boat load of electrics. I'd say its a 6/10 for difficulty. It will probably take you about three to four hours if you've never been under the airbox before and can wield a spanner pretty good. If you've had the box off in the past it'll be two and a half hours tops. If you're not over confident come over to rhyl and we can do it one evening. Oh and I think it's gone from about 1/3 to 1/4 turn (give or take) Andy B
Without sounding daft.. but im intrigued as this will be my next upgrade as I have a fused wrist.. and i'm either full throttle or nothing at all. So a quick action will.give me better use. However can I just change the tube grip for a hrc one or do I have to change throttle cables also to compensate ?
If you plan on getting a QS, do them both at the same time. I did my QAT and then a week later got the QS so had to strip it all again lol.
Which QS did you go for is it worth fitting pipercross fitter ive only got piperworx can not ready to fit power commander yet
Can you tell me the exact kit you went for pal ? As im keep to look into this further with quick shifter so if you could label all parts you applied
HONDA CBR100RR HRC QUICK ACTION THROTTLE,2008-2012 MODELS,QUICK ACTION THROTTLE, | eBay Thats the full kit. I order from padgetts so you can ring (Helen) and get it for the same price and next day delivery off them or just buy from ebay. If you tell them the bike and what you want they'll know exactly what you want. Otherwise thats the full kit. It might be that you can get away with mixing parts etc but I just bought the lot
I've got the gp, just waiting for a shift rod before its maiden voyage. I wouldn't bother with the aftermarket filter weather I had a pc or not, I've never really seen the point, the best you could hope for is a couple of bhp, but most of the time you won't even get that. Andy B
Can you just give me. A breakdown on what this is going to achieve.. I've brought it now. However I understand it's a 1/6th turn now but standard throttle cables accept it ? Butterflies in the throttle body be ok with it all ? Difficult to fit..?
