I have the Brembo MC (19x20) and HEL lines from my trackbike that didn't sell on ebay, would they fit my 2010 blade??
Yeah mate they are universal . The Hel lines might not but are only around £50 quid get a nice bottle of Motul PBF600 or some ATE blue super racing fluid. Or over winter send the brembo in for a service and you will be good to go ready for the sun again . I always use the thicker crush washers aswell so you dont have to double up in the middle of the banjo bolt. This might be best mate as you want your brake light to work . GOODRIDGE DOUBLE BANJO BOLT BRAKE LIGHT SWITCH M10x1 stainless steel | eBay Goodridge Brake copper crush washers for 10mm - 3/8" bolts, 2mm thick 44517 | eBay Or get the stuff tootle to mine only down the road lol we will fit and bleed up
Is this BREMBO FRONT BRAKE MASTER CYLINDER 19 x 20 RATIO "NEW" | eBay .................the same as this? Brembo RCS Master Cylinder - Demon Tweeks If so I may be tempted to abuse the Card again!
No buddy the RCS has a turn screw that adjusts the bite /travel of the lever from 19x18 and 20x18 and RCS all have flip up levers Other is standard ratio but both do the same job and both cracking bits of kit