cbr 1000 rr45/67 aftermarket headers

hi all is there any diff between the 2004/5 and the 2006/7 after aftermarket headers because i was loooking at hindle headers for a 2006/7 and they say they dont fit the 2004 hindle as another part no for the 2004/5

 

thanks martin

arthurbikemad said prettymuch the samething in a pm thanks again for your help

 

the reason i ask is the hindle 06/07 are a good price i may just take a chance at the price HONDA CBR1000RR 06 07 RACE Exhaust Headers Set stainless steel full system pipe | eBay

 

Oh very nice!! just what I need..

 

hi all i sent hindle and asked them what the diff was and they sent this email back

Thank you for taking the time to contact Hindle Exhaust Systems.

The two systems are very similar; however, the mounting bracket on the mid-pipe is in a complete different location. This mounting bracket attaches to the stock location - the 2006 model had a different stock location than the 2004 model.

I hope this information helps answer your questions. Please feel free to contact us at any time should you have any other questions about our products. We are here to help.

Kind regards,
Alison

so with a little modding it would fit i think

 

i think they mean the mounting hole on the stock headers as a mounting hole on the on the bottom of exhaust mid section that bolts to the engine or frame some were if you look at a set of stock headers you will see a mounting brk [ a plate ] welded the the back of the mid section with a hole in it for a bolt you cant see it on this photo [ hindle system ] unless they are on about what i call the link pipe

 

there dosnt seem to be one looking at other images of the hindle system so now im not sure what mounting brk they are on about unless they are on about what i call the link pipe

 

on the stock end can the pipe that joins the standard link pipe as a metal tab welded to it with a hole in it that a bolt goes in to attach it to the subframe

 

Visually there seems to be little or no difference, the welded bracket and location points are virtually identical. Assume the pipes themselves differ to clear the fairing as these are different. Keep us posted daz1 as I maybe interested too.

 

hi mate i resent hindle a email asking that if i remounted the mounting brk would they fit then just need to know what mounting brk they are on about as i cant see any on the system just waiting for an email back

 

Thanks buddy. Pipes don't seem to have the bracing bracket between the pipes to locate onto the frame.

 

i would love this system 04 05 06 07 CBR 1000 1K 1000RR COMPLETE AKRAPOVIC EXHAUST SYSTEM CAN HEADER Y | eBay

 

another email i had from hindle Hello,


The biggest issue is that the bracket is welded on to the mid-pipe. I would most likely have to be cut off and then re-welded at the correct location.

I hope this helps - please let me know if you have any other questions.



Kind regards,
Alison

so its deff doable and quite easy but i still dont know wich bracket they are on about there must be a bracket mount on the mid section some were ive re emailed them to see if they would send me a picture of it