a few upgrades of Dannybhoys SP

Yes.. and I gutted the air intake (so no flappers etc) and CAT & a PC3 and race air filters also

 

Good results indeed then Gilesy bet your happy with that. But the sp felt quite a bit faster on the road?

 

very happy LC.. but the SP is quicker top end. If your going through the gears to the limiter, the Sp is quicker, country roads, pretty much nothing between them

 

Here is the SP we took to dyno today at HM Racing Always good to visit them



This is the WRONG dyno sheet, but it made 172BHP @ 82ftlb in the end, the full race system seems to work well, a little flat spot bottom end that we put down to the exhaust being a FAT race system but worth it for the looks, and who knows, some cams would sort that out.!



Not bad power I guess, this sheet is my 07 It's had a few mods maybe the repsol paint work gives it an edge!

 

Hard to read your print out Arthur but is that 176? If so whats been done to her!!

 

so both SP's probably ball-park then if Danny gets the Baffle-that-doesnt-look-like-a-baffle out of the Akro..

So really the conclusion is then that they are tuned for power up top, our older bikes are tuned more towards mid-range.. ? and the SP is really just Smooooth rather than chasing BMW numbers..

 

Many times I have seen the older model make more power but ride wise the later bike is stronger, much of that is the extra 1500 or so RPM, HRC ECU and a raised limiter on older bikes gets more power but at risk of the motor, yes LC mine makes 176 (waves willy) with a few tweaks stock motor, BMC race filter, open intake, no flapper, PCV, AT200, full Akra Evo race and so on, had HRC stacks and ECU once but sold them off as far to peaky for my liking.
The guys at HM loved the SP as I do, I'd have one in a snap...well....as a project

Better image added LC (edit)

 

very impressive Arthur! when you say open intake what do you mean no ram air funnel?

 

Fully gutted intake mate, had a carbon one but did not fit right so gutted the OEM, big enough to reach inside and grab the filters

 

That's one nice exhaust there Arthur ,did it take a lot of adjustment to get it to fit

 

Yes mate, cut out the lowers left and right plus the upper a little but kept it clean and stock looking, steady hand plus made some new mounts to correct the fit of the lowers



Also made some off set spacers for the rear sub frame exhaust hanger as Arrow seemed to give the wrong ones or maybe they were for a race subframe

Check my twitter pics for more of the job.

 

Mine maybe up for sale very very soon.. non abs 1000 miles

 

Will take a px plus cash

 

Ha what for? an older model SP

 

I thought I was bad !

 

Anything that makes the deal correct cash wise Arthur

 

Arthur how do ya dee the twitter thing

 

Here mate, worth joining and pick who you'd like to follow, John McPint, Spalders and so on...

https://twitter.com/arthurbikemad

Me @arthurbikemad

 

Thats one steady hand Arthur cutting new SP fairings!