2008 CBR1000RR Stutters/misses

Discussion in 'Maintenance' started by Leo1974, Jan 12, 2015.

  1. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    Hi,

    I'm going to describe this as best I can.

    Started the bike up this morning. It reached normal idling speed (about 1200rpm) no problem.
    I pull off and the bike stutters/hesitates almost like there is a fuel starvation and then it accelerates normally and then stutters and then accelerates normally and then stutters and and...

    On Friday I removed and cleaned the air filter. Afterwards I rode the bike for a short distance and all seemed fine.

    After work today I removed the fuel tank cover etc to see if all the connectors on the air box were plugged in correctly.
    No problem there and all the fuel hoses also look fine.

    Any ideas what could be wrong?
     
  2. Si.

    Si. God Like

    Joined:
    Jan 25, 2011
    Messages:
    4,852
    Likes Received:
    3,343
    Plugs?

    Dirty fuel/filter

    gunked up injectors/throttle body needs a clean?
     
  3. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    Thanks Si.

    Going to have to check all those things out tomorrow.
    Never had this issue before.
     
  4. racman

    racman Active Member

    Joined:
    Jan 19, 2013
    Messages:
    408
    Likes Received:
    96
    did you lift/remove fuel tank to do any of your maintainance by any chance?
     
  5. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    I lifted the tank but did not remove it racman. I rested the tank at an angle by placing a support between the tank and the air box.
     
  6. Dave

    Dave Member

    Joined:
    Apr 2, 2014
    Messages:
    357
    Likes Received:
    84
    Leo,check fuel hoses, breathers under the tank for kinks or that they are not pinched. Can't be much if it was running ok before lifting the tank.
     
  7. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    Thank you Dave. I'll check it out.
     
  8. racman

    racman Active Member

    Joined:
    Jan 19, 2013
    Messages:
    408
    Likes Received:
    96
    as dave says leo. thats the reason i asked. i would guess that you have kinked/pinched the fuel breather or actual supply pipe. good luck
     
  9. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    Thank you racman.
     
  10. garyauk

    garyauk Active Member

    Joined:
    Feb 22, 2011
    Messages:
    402
    Likes Received:
    85
    Leo, has the bike been lest standing for a while before start up?

    Fuel does go off after a while, but that would normally be a couple of months or so
     
  11. Barstewardsquad

    Barstewardsquad God Like

    Joined:
    Feb 27, 2012
    Messages:
    8,277
    Likes Received:
    3,608
    Open the fuel cap if it does it. If it "pops" then it is likely to be the breather.
     
  12. Gilesy

    Gilesy Elite Member

    Joined:
    Aug 31, 2013
    Messages:
    2,081
    Likes Received:
    1,181
    do you have a quick shifter on her? could you have trapped any wires while you had the tank up?
     
  13. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    @Barstewardsquad. Will check it out today after work.
    @ Gilesy I do not have a quickshifter. Will check for pinched fuel hoses etc today.
     
  14. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    The bike never stands for longer than a week.
     
  15. martinowen

    martinowen Moderator
    Staff Member

    Joined:
    May 29, 2012
    Messages:
    9,907
    Likes Received:
    3,680
    I kinked the main fuel pipe, when putting my tank back and on full acceleration it was like ridding a bull !
     
  16. Leo1974

    Leo1974 New Member

    Joined:
    Sep 18, 2013
    Messages:
    21
    Likes Received:
    2
    Mine does the same.

    I have printed the schematics of all the pipe routing/positions.
    I do not remember seeing the fuel tank breather hose in the position that it should be when I had a quick check yesterday when I lifted the tank.
     
  17. martinowen

    martinowen Moderator
    Staff Member

    Joined:
    May 29, 2012
    Messages:
    9,907
    Likes Received:
    3,680
    It was the main fuel line I had done not the breather
     

Share This Page