Hm dash gear indicator

It's not working on my bike. Any ideas plz

 

What year is your blade and does it have a gear position sensor on it ,if not then won't work,if it has check bike year in dash setting and download latest firmware if not done

 

2011. I have noticed it says 2012 software does that make a difference

 

No it does not could you see the gears on your OEM dash before you used hm dash .?

 

Doesn't have it on oem dash

 

Well sounds as tho it does not have a gear position sensor on the bike Scott so you won't get the gears showing up on the hm dash

 

Not sure if you have this information, hope it's of some help !
MODEL SETUP: Select which model bike you have installed the HM Dash on. M
!
GEAR RATIO SETUP: Some manufactures send this info automatically to the HM Dash but others require you set this up manually. Should you need to do this manually we recommend that you do it on a secure paddock stand with at least 2 persons present. To do this select SET GEAR RATIOS. Start the bike if not already running making sure you are in neutral. Go in to first gear and run at a steady RPM (we recommend 4000rpm but whatever rpm you select make sure you use the same for all gears selection) hold this steady and press SEL this will store the ratio selected for 1st gear and move on 2nd. Change in to 2nd gear and again hold at a steady 4000rpm and repeat the above process. Do this for all gears. Once completed it will return you to the GEAR RATIO SETUP screen

 

Good advise had to do the same on me 600 rr

 

Tried that thanks tho. Didn't work

 

yes you will.

the bike does have a gear pos sensor,it just doesn't have it on the dash on the 2011 down but on the 2012 it does,pretty sure you have the wrong s/w or firmware on your dash scott.hve you told HM that its a 2011 but the s/w is for a 2012?

 

I didn't say that on the phone. I did say that to the person that put it on but he said it made no difference. I can't buy an up to date computer just to upload hm software. And it's quite a drive to go to hm. What do I do lol

 

ok,ring HM.tell them you have an 11 bike,but have 2012 s/w,ask them what to do.do you not have a laptop,or one you can borrow to put the s/w onto the dash?

 

Rung em. Changed bike through the dash menu. But still won't work they want it back to have a look at

 

If you can get over to My way I can update firmware before sending off?

 

Thanks mate that's nice of u

 

No worries mate drop me a msg and will help

 

random reply I know but did this get sorted? just fitted my dash and gear indicator nother working also.

 

Yea. New dash ! Send back to hm mate