guys I'm in need of help 2008 Blade, just been synching in a gear indicator and running it through the gears on a paddock stand, wouldn't synch so took a few goes and hence starting and stopping bike whilst reading instructions Now it won't start Battery is ok, I can hear the fuel pump buzz, fuses under seat are good It struggled the previous time and I thought I had flooded it so held the throttle open a bit and when it kicked in it rev'd to about 11,000 before I had time to release the throttle and now it won't start, just spins as if it's no fuel but it does Any suggestions, was planning a ride tomorrow Help
Yep tried, tried the other key swapped the fuel pump relay, tested all the fuses, i can hear the pump prime but not getti g any unburnt fuel smells when turning it over
also food for thought. i had a cbr600 steelie track bike. was non start one day after it had been running perfectly. the problem was that 1 spark plug had failed rendering it a non start not even attempting to fire on any of the other 3 cyls
Full marks to Racman What a wan£er I am. The gauge showed just 1.4 used,and I could see fuel in the tank, but I forgot how long I had it running over winter when doing the coolant change idling whilst bleeding it. I undid the tank and strapped it upright and tried it and it fired up. Suppose it could have been worse, I could have been 3 mile down the road tomorrow morning What a to$$er
