SP Brembo Calipers

Discussion in 'General 1000RR Discussion' started by stupot, Nov 18, 2016.

  1. stupot

    stupot Active Member

    Joined:
    May 30, 2015
    Messages:
    367
    Likes Received:
    103
    I have read on here somewhere that the Brembo SP calipers differ slightly from the proper M4 Brembo, mainly on the piston sizes.

    However are they the same fitment 108mm is obvious but would spacers be needed to fit the into the Showa forks?
     
    #1 stupot, Nov 18, 2016
  2. Danny555

    Danny555 New Member

    Joined:
    Oct 30, 2016
    Messages:
    26
    Likes Received:
    18
    From what I've heard mate they bolt straight on.
     
    #2 Danny555, Nov 18, 2016
  3. sps170373

    sps170373 Moderator
    Staff Member

    Joined:
    May 24, 2013
    Messages:
    7,860
    Likes Received:
    3,092
    Unsure about the SP brembo's but the M4 brembo require you to take off the spacer from the fork bottoms on standard forks
     
    #3 sps170373, Nov 18, 2016
  4. 1000rrboyjay

    1000rrboyjay Active Member

    Joined:
    Jan 2, 2013
    Messages:
    332
    Likes Received:
    180
    Not 100% certain but I'd say the spacers need to come out
     
    #4 1000rrboyjay, Nov 18, 2016
  5. Dave The Blade

    Dave The Blade Active Member

    Joined:
    Jul 28, 2014
    Messages:
    39
    Likes Received:
    14
    I read an article about Brembo yonks ago, think it was Fast Bikes who visited the factory. They mentioned that an M4 caliper for an Italian manufacturer would be different to a Japanese one. They said the Italian manufacturer requires a stronger intial bite and the Japanese ones were required to be softer. They also soke about their MotoGp department and it was mind blowing ho wmany specs of the same caliper there were based on rider preference.
     
    #5 Dave The Blade, Nov 24, 2016
  6. Dave dunlop

    Dave dunlop Elite Member

    Joined:
    Jan 11, 2015
    Messages:
    1,903
    Likes Received:
    1,034
    Yes definitely still 108mm just different piston sizes
     
    #6 Dave dunlop, Nov 24, 2016
  7. yorkshiregooner

    yorkshiregooner Active Member

    Joined:
    Jan 20, 2012
    Messages:
    534
    Likes Received:
    210
    Remove the spacers and fit inserts to locate the caliper.
     
    #7 yorkshiregooner, Nov 26, 2016

Share This Page