Fitting ohlins damper and un-hooking stock damper

Discussion in 'General 1000RR Discussion' started by Andrew Williams, Oct 16, 2018.

  1. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Hi guys, after a bit of advice. Ive got 2009 model and Ive fitted the hrc front subframe and ohlins steering damper. I unhooked the original damper via taking the arm off the spline, can it be left in this configiration for track with out any problems?

    Ive attached an image, the arm will be comoletely unbolted 15397033663222884645957262447240.jpg

    Thanks in advance
     
    #1 Andrew Williams, Oct 16, 2018
  2. Lifeofriley

    Lifeofriley New Member

    Joined:
    Jan 15, 2018
    Messages:
    195
    Likes Received:
    25
    I would remove that arm off the spline bud.
     
    #2 Lifeofriley, Oct 16, 2018
    • Agree Agree x 1
  3. Spygoat

    Spygoat Well-Known Member

    Joined:
    Aug 3, 2018
    Messages:
    2,056
    Likes Received:
    1,003
    agreed
     
    #3 Spygoat, Oct 16, 2018
  4. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Yeah thats coming off buddy, will the damper be ok to be left on though disconnected?
     
    #4 Andrew Williams, Oct 16, 2018
  5. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Yeah thats coming off buddy, will the damper be ok to be left on though disconnected?
     
    #5 Andrew Williams, Oct 16, 2018
  6. Lifeofriley

    Lifeofriley New Member

    Joined:
    Jan 15, 2018
    Messages:
    195
    Likes Received:
    25
    Yes mate it will be fine. Why not remove the hole unit and ignore the hesd light?
     
    #6 Lifeofriley, Oct 16, 2018
  7. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Yeah thats what id like to do really mate, the unit simple to remove?
     
    #7 Andrew Williams, Oct 16, 2018
  8. Lifeofriley

    Lifeofriley New Member

    Joined:
    Jan 15, 2018
    Messages:
    195
    Likes Received:
    25
    Ah yes mate piece of piss. Removed mine recently but i run hrc loom and ecu so no issues with hiss or hesd.
     
    #8 Lifeofriley, Oct 16, 2018
  9. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Ok cool, that shit can come off tomorrow then with it unplugged and off it will juat throw a perminant light up on the dash is it? No chwmage in performance ect?
     
    #9 Andrew Williams, Oct 16, 2018
  10. Lifeofriley

    Lifeofriley New Member

    Joined:
    Jan 15, 2018
    Messages:
    195
    Likes Received:
    25
    Im not to sure mate i would have Thought it would just throw a code but i did just read the older model would put it in limp mode! Doesnt seem tobe much info out there on it.
     
    #10 Lifeofriley, Oct 16, 2018
  11. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Maybe ill just take that arm off and run like that until i can get it mapped out. Its still plugged in that way so i assume it wont throw up a fault
     
    #11 Andrew Williams, Oct 16, 2018
  12. Spygoat

    Spygoat Well-Known Member

    Joined:
    Aug 3, 2018
    Messages:
    2,056
    Likes Received:
    1,003
    Likely the bike will go into limp mode with it unplugged. Not sure anyone makes an eliminator for the unit.
     
    #12 Spygoat, Oct 17, 2018
  13. roboticus

    roboticus Active Member

    Joined:
    Jun 18, 2017
    Messages:
    543
    Likes Received:
    163
    think u can turn it off with a ecu tune
     
    #13 roboticus, Oct 17, 2018
  14. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Has anyone ran there bike on track with the original damper disconnected but it still plugged in?
     
    #14 Andrew Williams, Oct 17, 2018
  15. Spygoat

    Spygoat Well-Known Member

    Joined:
    Aug 3, 2018
    Messages:
    2,056
    Likes Received:
    1,003
    I haven't. I run mine with the HESD and haven't had any issues with it.
     
    #15 Spygoat, Oct 17, 2018
  16. Lifeofriley

    Lifeofriley New Member

    Joined:
    Jan 15, 2018
    Messages:
    195
    Likes Received:
    25
    I've had some nasty head shakes so bored it off! Aggresive gearing doesn't help!
     
    #16 Lifeofriley, Oct 17, 2018
    • Like Like x 1
  17. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Ive gone ohlins on mine now so dont need the stock damper on there no more
     
    #17 Andrew Williams, Oct 17, 2018
    • Like Like x 1
  18. Spygoat

    Spygoat Well-Known Member

    Joined:
    Aug 3, 2018
    Messages:
    2,056
    Likes Received:
    1,003
    I'm running stock gearing on my SP, eventually I may add an Ohlins to the system. At that time I'd likely have the HESD programmed out.
     
    #18 Spygoat, Oct 17, 2018
  19. Andrew Williams

    Andrew Williams New Member

    Joined:
    Oct 16, 2018
    Messages:
    26
    Likes Received:
    6
    Yeah i think best option is get it mapped out and then just remove unit all together
     
    #19 Andrew Williams, Oct 17, 2018

Share This Page