I have decided to sell my bike and all the parts for the bike. I have not started it for around a year and sadly just don't see that I will get the time to finish it. It will make an amazing project bike for someone. At present the bike is a stock engine but have a spare ported head, New Cosworth pistons, HRC Cams and HRC Springs to transform the engine. I have the HRC Gearbox, Clutch and Deep Sump to finish the setup I have pretty much most HRC parts available for the fireblade. Looking for offers around £12.5k for everything. collection from South London The list is not exhaustive as I have have many duplicate titaniumd bolts etc. Items are described as fitted (on bike) and not fitted (In a box. Some items are new and some used) 2009 CBR1000RR with around 3,000 miles - V5, Personalised plate, 2 keys, NO MOT, NO FINANCE NEVER BEEN DROPPED , CRASHED OR RACED (Bike was even featured in Performance bikes magazine) Currently in street setup with 2015 Repsol fairings with custom 09 tail with a Carbomoto Carbon fiber undertray and number plate (Tail piece painted trim Needs tidying) Datatool Red alarm fitted with 2 key fobs Front wavey disks currently fitted (both need replacing as buttons have worn the carrier) Brembo supersport front discs to replace the wavey disks Stock Radiator needs testing (I have not started it for around 12 months) Marchesini Genesi M7RS wheels in Orange direct from Marchesini Titanium stock front spindle fitted to the bike HRC Front MEL (to fit stock wheels) Spec front Spindle (brand new and never been fitted) Pull cups for front HRC Spindle not fitted FGRT803 Ohlins front forks 8.5 fitted (I believe) Additional ohlins 10.5 springs for front forks HRC Steering Damper fitted HRC Steering Damper brackets fitted HM Dash 10hz version with GPS - New Screen fitted by HM Racing HM GP Quickshifter fitted Honda Racing (Ex Bathams) stock style tank anodised black fitted Honda racing rearsets (£300) ex RAF reserves fitted HRC Fuel pump lowering kit for tank (Ex Bathams) fitted HRC Throttle bodies very rare not fitted as can only be used with HRC ECU and assist with engine braking HRC ECU for 2009 not fitted HRC Front Clock bracket not fitted HRC Bottles and hose not fitted HRC Stock 08 clock not fitted HRC Tilt sensor not fitted HRC 2 button control handlebar switch not fitted HRC SBK oil sump and gaskets not fitted HRC Oil pressure relief valve not fitted HRC Thermostat not fitted HRC Oil Catch tank fitted HRC Oil cooler new boxed not fitted HRC Clutch cable not fitted HRC Clutch plates new and not fitted HRC Clutch new boxed and not fitted HRC Gearbox P1&P2 not fitted HRC Subframe with all fittings with Ti bolts not fitted HRC Swingarm fitted HRC MEL shock linkage and titanium bolts HRC Showa rear shock with ohlins spring not fitted HRC Generator cover, gasket, rotor not fitted HRC Spark plugs not fitted HRC loom and ancillaries not fitted HRC Rear spindle new and not fitted HRC USB adapter not fitted Brembo RCS19 with Carbon bracket fitted and Titanium bolt Brembo clutch lever for stock bracket fitted Brembo M4 front brakes fitted with rare Hollow Titanium bolts for weight reduction HEL Front brakelines with rare TI joints fitted (HEL stopped making TI brakelines) Harris 1" raised clip ons fitted Harris standard clip ons not fitted Honda racing bar ends to fit stock weights not fitted Evotech Honda Racing Front clock bracket as used by Swan Honda for motec dash not fitted Honda Racing modified HRC Clock Bracket for motec dash not fitted Renthal Sprockets one fitted and spares SP Subframe powder coated black fitted Titanium swingarm Spindle fitted Titanium HRC stock rear spindle (wider than stock) fitted HRC Rear spindle new and not fitted Ten kate velocity stacks fitted Ten kate gear rod linkage fitted MWP air filter fitted Honda Comfort seat fitted Ohlins ttx rear shock with remote adjuster bracket and rare silver adjuster fitted RCS Titanium Shock Spring. fitted Electrex Generator (Fits HRC Cover) and rotor not fitted Titanium engine frame bolts made by TI64 using WFR Honda BSB bikes as template fitted Honda racing clipon bars not fitted Brembo 84mm rear brake and underslung bracket fitted 2 x HRC Radiators battered and untested. not fitted Akrapovic full TI system inc end can fitted Akrapovic longer mid pipe not fitted Akrapovic additional can with baffle (Needs new carbon cap fitting) not fitted New Akrapovic cap for above can not fitted Spare Akrapovic strap not fitted Spare Akrapovic Blind rivets and bands not fitted Racing fairing brackets inc Honda racing qr brackets not fitted General Provbolt Titanium bolts on frame and ancillaries fitted 08-12 Samco orange hoses fitted HRC USB adapter not fitted Akrapovic/Honda Racing Carbon Front mudguard painted pearl Siren Blue fitted Gilles gearshaft support fitted Gilles TI Rear wheel and Swingarm bolt fitted Probolt Ti Cylinder head cover bolts not fitted Probolt Ti Cam adjuster bolt not fitted Probolt oil Ti sensor bolt fitted Probolt oil Ti Filter bolt fitted HRP Alloy Cylinder head cover bolts not fitted Ti Exhaust Nuts and studs fitted Custom Ti Side stand spindle and nut fitted Factory Pro Shift kit not fitted HRC QA throttle not fitted HRC Front wheel sensor,wheel rotor and cables not fitted Braketech Axis Full Floating rear brake disk Honda Comfort seat fitted Other items Rectifier brackets to fit rectifier over the generator CRC Upper and Lower race fairing with Hibre Tank, tail and seat cover (Upper and lower requires a repaint) Honda Racing fairing parts damaged and used Honda racing carbon mudgards x 2 as used on HM Plant TT bike 2008 Repli-cast Honda Racing carbon test fairings (tank and tail unit 2016) used by Jason O'Halloran Honda racing rear wheel guide bolts over the sprocket Honda racing chain guide (with spares) GB Racing covers with Honda Racing branding Easi Grip Tank pads (Honda Racing Spec) as used on 2014 TT Bikes Foam Fuel cap holder to spec used by John Mcguiness on 2009 TT Bike QR fuel line Stock Swingarm SP top Yoke Honda Racing top and bottom yoke replicas of the 2009 CBR1000RR Honda Racing TT Bike
And ambitious. I just cannot see money being recovered on this. That's a massive ask of £12,500 for a 10-year-old bike - despite all the goodies included. I am wondering if even selling parts separate would nett that amount? Just my opinion of course; not wishing to bring doom and gloom to the forum.
Updated list 2009 CBR1000RR with around 3,000 miles - Comes with the V5. Undamaged silver frame, Personalised plate Repsol related number plate 2 keys plus basic key Datatool Red alarm with 2 key fobs NO MOT NO FINANCE NEVER BEEN DROPPED , CRASHED OR RACED Bike was even featured in Performance bikes magazine Currently in street setup with 2015 Repsol fairings (Requires replacement stock undertray, tail trim and cowl) Front Galfer wavy disks currently fitted (both need replacing as buttons have worn the carrier) so will need removal Stock Radiator needs testing (I have not started it for around 12 months) Marchesini Genesi M7RS wheels in Orange direct from Marchesini with SBK front TI bolts R&G front and rear spindle protecters with custom titanium rods Titanium stock front spindle fitted to the bike and Titanium nut Alloy Pull cups for front and rear HRC Spindle not fitted Ohlins HO888 ttx rear shock with remote adjuster bracket and rare silver adjuster fitted Ohlins FGRT803 front forks 8.5 fitted (I believe) Additional ohlins 10.5 springs for front forks HM Dash 10hz version with GPS - New Screen fitted by HM Racing HM GP Quickshifter fitted Honda Racing (Ex Bathams Honda BSB) stock style tank anodised black fitted Honda Racing rearsets (£300) ex RAF reserves fitted used in BSB and TT HRC Front MEL (to fit stock wheels) Spec front Spindle (brand new and never been fitted) HRC Steering Damper fitted HRC Steering Damper brackets fitted designed to reduce flex. HRC Fuel pump lowering kit for tank (Ex Bathams Honda BSB) fitted HRC Throttle bodies very rare not fitted as can only be used with HRC ECU and assist with engine braking HRC ECU for 2009 not fitted HRC Front Clock bracket not fitted HRC Bottles and hose not fitted HRC Stock 08 clock not fitted HRC Tilt sensor not fitted HRC 2 button control handlebar switch not fitted HRC Thermostat not fitted HRC Oil Filller cap fitted HRC Oil Catch tank fitted HRC Oil cooler new boxed not fitted HRC Clutch cable not fitted HRC Clutch plates new and not fitted HRC Clutch new boxed and not fitted HRC Gearbox P1 & P2 not fitted HRC 2009 inlet and exhaust Camshafts with a full set of HRC Springs HRC Subframe with all fittings with Ti bolts HRC Swingarm fitted HRC Quick release rear spindle new and not fitted HRC MEL shock linkage and titanium bolts HRC Showa rear shock with ohlins spring not fitted HRC Generator cover, gasket, rotor not fitted HRC Spark plugs not fitted HRC loom and ancillaries not fitted HRC Rear spindle new and not fitted HRC USB adapter not fitted HRC Front wheel sensor,wheel rotor and cables with spare sensor cable HRC QA throttle not fitted HRC Front wheel sensor,wheel rotor and cables with spare sensor cable HRC Generator cover HRC Generatior rotor for 2008-2010 model Brembo supersport front discs to replace the worn out wavy disks Brembo RCS19 with Carbon bracket fitted and Titanium bolts Brembo clutch lever for stock bracket fitted Brembo M4 front brakes fitted with rare Hollow Titanium bolts for weight reduction Brembo smoked front brake reservoir Brembo 84mm rear brake and underslung bracket fitted HEL Front brakelines with rare TI joints fitted (HEL stopped making TI brakelines) Harris 1" raised clip ons fitted Harris standard clip ons not fitted similar to ones used on Honda TT bike Renthal Sprockets one fitted and spares SP Subframe powder coated black not fitted Titanium custom swingarm Spindle fitted and based on HRC version Titanium HRC stock rear spindle (wider than stock) fitted Ten kate alloy velocity stacks fitted Ten kate gear rod linkage fitted Ten kate QR fuel line Ten kate Rectifier bracket Ten Kate blockoff covers MWP air filter fitted Ohlins HO888 TTX rear shock with remote adjuster bracket and rare silver adjuster fitted RCS Titanium Shock Spring. fitted Electrex Generator (Fits HRC Generator Cover) Electrex rotor and its own rectifier not fitted Titanium engine frame bolts made by TI64 using WFR Honda BSB bikes as template fitted Custom Ti Side stand spindle and nut fitted 2 x HRC Radiators battered and untested. (1 stock size and 1 larger) Akrapovic full TI system inc end can fitted as used on TT and BSB bikes Akrapovic longer mid pipe not fitted - slightly longer version Akrapovic additional can with baffle for track days (Needs new carbon cap fitting) not fitted Akrapovic cap for above can not fitted Akrapovic strap not fitted Akrapovic Blind rivets and bands not fitted Akrapovic/Honda Racing Carbon Front mudguard painted pearl Siren Blue fitted General Probolt Titanium bolts on frame and ancillaries fitted Samco orange hoses fitted for 2008-2010 models Gilles gearshaft support fitted Gilles TI Swingarm bolt fitted Probolt Ti Cylinder head cover bolts not fitted Probolt Ti Cam adjuster bolt not fitted Probolt oil Ti sensor bolt fitted Probolt oil Ti Filter bolt fitted HRP Alloy Cylinder head cover bolts not fitted Ti Exhaust Nuts and studs fitted Custom Ti Side stand spindle and nut fitted Factory Pro Shift gear shift kit not fitted to make gear changes smoother Braketech Axis Full Floating rear brake disk and Titanium bolts Other items Rectifier brackets to fit rectifier over the generator (1 alloy and 1 Carbon Fibre) CRC Upper and Lower race fairing with Hibre Tank, tail and seat cover (Upper and lower requires a repaint) Honda Racing lower fairing cracked and requires repaint Honda Racing Endurance tail with LED light used Honda racing carbon mudgards x 2 as used on HM Plant TT bike 2008 Repli-cast Honda Racing carbon test fairings (tank and tail unit 2016) used by Jason O'Halloran Honda racing rear wheel guide bolts over the sprocket as used on TT bike Honda racing chain guide (with spares) as used on TT bike Honda racing clipon bars not fitted as used on TT bike GB Racing covers with Honda Racing branding Easi Grip Tank pads (Honda Racing Spec) as used on 2014 TT Bikes Foam Fuel cap holder to spec used by John Mcguiness on 2009 TT Bike Stock steering damper Thermostat housing Stock rear brake Stock Swingarm SP top Yoke Honda Racing top and bottom yoke replicas of the 2009 CBR1000RR Honda Racing TT Bike Evotech Honda Racing Front clock bracket as used by Swan Honda for motec dash not fitted Honda Racing modified HRC Clock Bracket for motec dash not fitted Woolwich Tuning USB adapter and bike harness Honda CBR1000RR ported cylinder head confirmed by JHS Racing (Part of 5 engines built with Wisco and HRC Cams)
Morning Si, I’ve pm’d you about the silencer I’d like to buy from you, willing to pay really good money for this silencer and carbon strap, I’ve been searching and ringing people, it will finish of my McGuinness replica you’d be helping me out a lot. Please let me know. See picture attached.
