2018 indicator/mirror cover

Anyone changed one of these or got a guide? Just wondered what the best way is to get them off. Mine has a few scratches on so bought a new one.

cheers

 

Should be the same as the 08-16 models. Remove the mirror assembly, then unbolt one bottom screw to have the cover released. Should be tab near the base too.

See the schematic for a better "picture"

 

Sorry. To simply replace the cover, you don't have to remove the mirror assembly from the bike.

 

Thanks for reply. I did this today, broke the old one getting it off. The cover just snaps on but is an arse to get off. I had to put a screw driver in the water drain hole underneath and start to prize it off from there, was really difficult but got there in the end.
Indicator screws in to the cover too so swapped that over and the new one snapped on starting at the top then the bottom, was really stiff to get it on. Don’t want to have to do that again.....

 

Maybe it's harder in the 17-19 models... in the 08-16 version, it's quite easy.