Fireblade SP2 wiring diagram

Anyone know if a wiring diagram for 2018 fireblade SP2 is available anywhere? Can’t find a workshop manual online or anything.

thanks in advance

 

The SC77 service manual including colour foldout wiring diagram is available via many of the online and brick and mortar Honda parts houses.

UK/Euro part number is 62MKF00

What you planned for your SP2?

 

Thanks for the reply. I’ll have a look on a parts list.

i have an alarm that i had fitted to my previous Fireblade that i removed before selling. I want to fit this to the SP2.
My previous Fireblade had a plug which had all of the indicator and power supplies in it so the alarm just plugged in to there. I am hoping there is the same plug on the SP2 but doubt it.

 

I think this is likely what you seek. Called an option connector

 

That is exactly the plug i’m after thank you so much for posting this. Need to get the multi meter out and see what wire is what.
Will have to think about the output of the alarm and the LED indicators. May need some resistors.....?

 

I found that plug but don’t think it is what i’m looking for. It only has two wires in that plug.
My 2012 had a plug with about 5 wires which were each indicator, permanent live, switched live and ground.
I’ve tested that plug and it isn’t indicators and it isn’t a permanent or switched live. Not sure what it is for......?

 

Sadly the workshop manual gives no clue. I had thought of taking a multimeter to it at the weekend.

 

Could this be what your after , Has a 12v ACC on the Grey wire

 

That's the connector I highlighted. But OP reckons there is no power to it. I'll have a play with it at the weekend and se what mine does

 

That connector has a green wire that goes to one of the common ground bundles of green wires and the other grey wire heads off to the 10A accessories fuse.

 

Thanks for the reply. Would you be able to somehow send me the wiring diagram complete please?