Bit of feedback

Discussion in 'Maintenance' started by Wayne Thomas, Jan 30, 2022.

  1. Wayne Thomas

    Wayne Thomas Active Member

    Joined:
    Aug 14, 2017
    Messages:
    121
    Likes Received:
    21
    Hi all.
    Been thinking for a while to start a business up offering MC detailing service with general maintenance, paint protection film fitting and other small jobs people can’t do themselves or rather pay someone.

    I know like myself and many others on here,love working on they’re own bikes and take pride in making them look beautiful and running sweet but I see loads that don’t and hate giving they’re bikes a good scrub and a polish.

    working full time at the moment but I need a change, been in the same career 37 years and really fed up with it lately so was thinking of just doing weekends at first to see if I can get enough work to get a liveable wage from it and go full time.

    What you think all, do you think there’s a slot in the market for something like this.
    Cheers
     
    • Like Like x 5
  2. Boothman

    Boothman Elite Member

    Joined:
    Aug 15, 2018
    Messages:
    2,993
    Likes Received:
    1,421
    I’m sure there is - good luck
     
    • Like Like x 1
    • Agree Agree x 1
  3. Selmer50mark

    Selmer50mark God Like

    Joined:
    Sep 6, 2016
    Messages:
    2,519
    Likes Received:
    2,197
    Go for it ,,, plenty of lazy people out there that will pay for a job done
     
    • Like Like x 1
  4. PauloHRC

    PauloHRC God Like

    Joined:
    Sep 3, 2017
    Messages:
    5,516
    Likes Received:
    4,016
    I'm sure @Lozzy will be up for a scrub and fettle!!

    Good luck with the new venture!

    Personally for me, part of the joy of motorcycle ownership is cleaning it and doing little jobs yourself.

    Like you say though, there's plenty of scruffy bastards out there :rolleyes:;):D
     
    • Agree Agree x 2
    • Like Like x 1
    • Funny Funny x 1
  5. bladey

    bladey Senior Member

    Joined:
    Nov 15, 2020
    Messages:
    1,146
    Likes Received:
    253
    Suppose it may depend on whereabouts you are too. High density population, fewer homes with garages etc makes working on bikes more difficult for many. Doubt if there are so many willing to ride for miles when all they need is a small job doing. YMMV.
    Good luck all the same
     
  6. Wayne Thomas

    Wayne Thomas Active Member

    Joined:
    Aug 14, 2017
    Messages:
    121
    Likes Received:
    21
    Fingers crossed but I’m going to give it go, sure it’ll take a while to build up so hopefully good word and mouth and recommendation will be key.
     
    • Like Like x 1
  7. CharlieR85

    CharlieR85 Elite Member

    Joined:
    Jan 3, 2016
    Messages:
    2,252
    Likes Received:
    1,007
    I think it could do well mate. I would imagine the more jobs you can do the better it would be. If you could service forks and calipers etc you'd expand your market. Other things like fitting heated grips or aux power sockets scares some people to death yet could be a good part of your business that would do well. Basic fault finding etc would be a good service to offer too. I bet there are a lot of people that get themselves in a pickle with simple stuff.

    With a van and some good equipment you could even fit and balance tyres.

    Good luck.
     
    • Like Like x 3
    • Agree Agree x 1
  8. Lozzy

    Lozzy God Like

    Joined:
    Feb 8, 2015
    Messages:
    10,230
    Likes Received:
    5,299
    You're right...I hate cleaning mine. I'd happily pay for someone to give it a good clean and acf50 it regularly in the winter.
    And like Charlie says, all the other little things would be handy too.
     
    • Like Like x 2
  9. Slick

    Slick Elite Member

    Joined:
    Nov 11, 2012
    Messages:
    2,491
    Likes Received:
    1,241
    I've considered doing something similar. Over the years I have amassed all the gear to do it but I would spend far to much time on it to make a living out of it!. Compared to cars motorbikes have much more surfaces to clean, paint is thin and soft so less forgiving to correct and bits like decals and trim getting in the way. Generally it takes a lot more effort to get a satisfactory finish.

    If you can get the balance right of time/materials cost and customer satisfaction then do it!

    But as other have said expand deffo into the other maintenance jobs
     
  10. dern

    dern Well-Known Member

    Joined:
    Apr 11, 2017
    Messages:
    633
    Likes Received:
    566
    I don't know if there is and rarely clean my bikes but I hope that it works out for you. I'd love to change careers like that. I like to do the mechanics side of things but I can't imagine there's money in it and I couldn't afford a yard big enough to bury all the rude customers I fell out with.
     
    • Like Like x 1
  11. Kevin1

    Kevin1 Elite Member

    Joined:
    May 30, 2012
    Messages:
    2,494
    Likes Received:
    1,120
    Thing is what would you need to charge to make a living wage? Then ask yourself would I pay that?
     
    • Like Like x 1
  12. LowSide76

    LowSide76 Active Member

    Joined:
    May 3, 2020
    Messages:
    393
    Likes Received:
    193
    This is so true. I do mates bikes for them every now and again.
    Did a mates kawasaki h2 for him and ended up spending best part of 12/14 hours on it, definately wasnt worth it but bike looked mega
     
    • Like Like x 1
  13. Wayne Thomas

    Wayne Thomas Active Member

    Joined:
    Aug 14, 2017
    Messages:
    121
    Likes Received:
    21
    Admin please delete if not aloud. Got a FB page set up @twowheeleddetailing
     
    • Like Like x 2
  14. raphael

    raphael Elite Member

    Joined:
    Feb 26, 2012
    Messages:
    3,951
    Likes Received:
    1,628
    No reason why you can’t make a go of it mate,I did similar with cars to the point it took over my normal work.

    social media is obviously a massive free platform to get your name out there and people like autobright do very good product at a very reasonable cost.

    good luck with it
     

Share This Page