Messy oil change!

Well I did an oil change on my yam XTR single.
Unfortunately the new oil container has no pouring neck. Careless of me ; I just decided to pour it into the funnel but a lot just dripped from the container onto the top of the bike.
Any suggestion on a suitable spray and rinse product to use.

ps this is for hidden and unreachable areas

 

Anything alcohol based, or just use a pressure washer to force it out.

 

Bilt Hamber Surfex HD is a monster of a degreaser, water based and pretty much safe ( as long as you dont let it dry) on all surfaces.
Spray on agitate where you can and hose off

 

Thanks.
I ended up using my trusted kerosene and BH auto foam.
I will get some Surfex to keep for future use; it sounds like good product to have in the garage

 

Surfex in neat form is a beast, look up the dilution ratios for application. i generally use 1:10 for general but neat it will strip grease off chains

 

Anything alcohol or vinegar based can be used to easily remove those stains.

 

Brake cleaner, chain cleaner, kerosene. Agitate with a brush. Rinse off after with water.

 

Traffic film renover and pressure wash off.
Wouldn't be be to worried if it's new oil as long as it's not on braked or tires.

 

Thanks guys,
I used suffex (thanks slick) followed by a normal wash and the ususal silicon spray (8 months ago!)
I stayed away from solvants as I didn't want to compromise the out of sight rubber components &electical wiring/ connectors. And leave any oil residue left over to act as corrosion protection