Does anyone know what the correct idle speed is for the RR-R when warm? My SC77 used to sit around 1200 but this one seems to settle at 1400 +/- 50, which seems a little high.
Will do. For the SC77 it is 1200 +/- 100, not sure about the SC82. I'm trying to get hold of a service manual.
That's what it should be according to the service manual, so I guess they set the idle speed higher than on the SC77.
Hi did you ever resolve your high idle, I've just fitted ackropovich end can which specified no remap and now idles at 2k which is no good because this causes blipper to not work correctly due to throttle not being off thanks
The idle speed is set higher on the SC82 than the SC77. Mine was in the correct range of 1400 +-50. 2000 is way too high if the bike has wamed up properly, so something is off. Just changing the end can shouldn't have that effect so I'd get it looked at if I were you. I had a high idle problem on another bike that was fixed by a full ecu reset. Did you fit a servo eliminator when you changed the exhaust?
It came with a blanking plate for the servo, I was going to try a servo incase this was better for electronics
Hi mate thanks for the reply, I think I will try an eliminator first b4 I go down the dyno route my 2018 blade had no valve but had been dynoed with Yoshi and ran perfect this is horrible won't blip down due to the high revs I think, was perfect b4. I have been told that all the servo buddy does is keep the engine light off