Hi guys, Help Help Help I need to get my girl on the road, I just replace the battery and didnt realise that you can spike Datatool 4 system, I have looked at the datatool website and I cant find any info, does anyone know how to DE SPIKE.........
Have a look at Elite Motorcycle Services Main Page, Motorcycle Security Specialists Should be able to download a pdf.
my batterys been off the bike for months i"ve also got data tool 4 will i also have problems when i put her back on the road. and whats spiking? cheers..
That's what I found: Going through the de-spike routine Technique for anyone who may have the same problem - 1. Remove lid from main alarm unit. 2. Remove internal battery link from PCB 3. Remove alarm inline fuse 4. Unplug PCB from alarm loom Leave out for at least 6 hours to drain With the bikes battery still in place and fully charged. 1. Plug PCB onto loom and reinstall 2. Replace In-Line fuse. 3. The alarm will sound for a period of approx. 30 seconds. 4. Allow the system to reset itself. 5. Replace internal battery link onto PCB. 6. Make sure all connections are complete and replace lid 7. Disarm system as normal (this may take up to 3 presses as system realigns itself) or re-align remote by holding both buttons for 5 seconds depending on model should be alive and alarmed again.....
Dave spiking as far as I can tell is when you disconnect the battery and you dont remove the inline fuse for the alarm, U can reset but a nightmare, and they dont like not having battery connected. Nightmare
