GB Racing

Discussion in 'Mods, Upgrades, Accessories and Products' started by MrB, Apr 12, 2012.

  1. MrB

    MrB God Like

    Joined:
    Mar 17, 2012
    Messages:
    2,348
    Likes Received:
    2,291
    #1 MrB, Apr 12, 2012
  2. ray

    ray Well-Known Member

    Joined:
    Jun 20, 2011
    Messages:
    1,156
    Likes Received:
    303
    Wanted GB Racing engine protectors for my 07 but they don't do them for anything pre 08.
     
    #2 ray, Apr 12, 2012
  3. ahmedf

    ahmedf Active Member

    Joined:
    Mar 4, 2012
    Messages:
    184
    Likes Received:
    40
    got them on my 600rr. quality made, fits perfect and blends perfectly with the bike, however, importantly (and gladly) havnt tested them out yet and hopefully will never have to

    [​IMG]
     
    #3 ahmedf, Apr 12, 2012
  4. tandbiskits

    tandbiskits Active Member

    Joined:
    Jun 8, 2011
    Messages:
    502
    Likes Received:
    131
    No experience of them, but quite a few of the biggish teams use them, they are on my want list.
     
    #4 tandbiskits, Apr 12, 2012
  5. blade1980

    blade1980 Active Member

    Joined:
    Apr 2, 2011
    Messages:
    912
    Likes Received:
    254
    I've the engine covers on my 2010 blade. Look great, and only takes about 10 mins to fit
     
    #5 blade1980, Apr 12, 2012
  6. kpone

    kpone Moderator
    Staff Member

    Joined:
    Jul 7, 2011
    Messages:
    14,273
    Likes Received:
    7,893
    Arthurs fitting them to his snail.
     
    #6 kpone, Apr 12, 2012
  7. dan.1moore1

    dan.1moore1 Senior Member

    Joined:
    Apr 27, 2011
    Messages:
    7,071
    Likes Received:
    1,009
    fitted mine a few weeks back .. best on the market IMO

    [​IMG]

    Easy to fit so i didn't bother with an installation guide


    [​IMG]

    [​IMG]

    Follow the instructions for the clutch side as there is 1 sealing washer that must be re used . ( i nearly missed it )

    fit everything finger tight , then you need one of these bad boys

    [​IMG]

    All bolts to 10Nm and jobs a goodn !
     
    #7 dan.1moore1, Apr 12, 2012
    • Like Like x 1
  8. Repsol Rob

    Repsol Rob Elite Member

    Joined:
    Aug 26, 2011
    Messages:
    3,345
    Likes Received:
    1,162
    Where from Dan fancy getting some to mine ?
     
    #8 Repsol Rob, Apr 12, 2012
  9. 1000rr73

    1000rr73 Active Member

    Joined:
    Jan 5, 2012
    Messages:
    1,392
    Likes Received:
    391
    Hi, what is the sealing washer referred to on the clutch side above, as I'd like to check my dealer fitted correctly.
     
    #9 1000rr73, Apr 12, 2012
  10. dan.1moore1

    dan.1moore1 Senior Member

    Joined:
    Apr 27, 2011
    Messages:
    7,071
    Likes Received:
    1,009
    Ordered of they're web site mate . I searched high and low for a better price but it's fixed everywhere .
     
    #10 dan.1moore1, Apr 13, 2012
  11. dan.1moore1

    dan.1moore1 Senior Member

    Joined:
    Apr 27, 2011
    Messages:
    7,071
    Likes Received:
    1,009

    1 of the bolt holes is also the weep hole for indicating the correct amount of oil is in the bike
     
    #11 dan.1moore1, Apr 13, 2012
    • Like Like x 1
  12. 1000rr73

    1000rr73 Active Member

    Joined:
    Jan 5, 2012
    Messages:
    1,392
    Likes Received:
    391
    Thanks Dan,

    So forgive my ignorance, why would you need a weep hole? Isn't that what the oil dipstick is for?

    So without pulling the cover off the bike is it safe to asume if they had not fitted this sealing washer then I would likely see oil coming out the bolt hole? So no oil seen = washer fitted? Bike came from large honda dealer so I am assuming they'd have fitted by the book but you never know!
     
    #12 1000rr73, Apr 13, 2012

Share This Page