Yoshi R77 baffle bolt...

Discussion in 'General 1000RR Discussion' started by Si., May 22, 2012.

  1. Si.

    Si. God Like

    Joined:
    Jan 25, 2011
    Messages:
    4,852
    Likes Received:
    3,343
    I put the baffle in yesterday, and lo and behold, the bolt that holds it in fell between the sleeve and can :mad:

    I fitted the baffle using another bolt, but other than taking the can off to get the one that fell in, is it ok to leave it in between the sleeve?? I.E it can't go anywhere and break anything?
    cheers!
     
    #1 Si., May 22, 2012
  2. Repsol Rob

    Repsol Rob Elite Member

    Joined:
    Aug 26, 2011
    Messages:
    3,345
    Likes Received:
    1,162
    As long as it does nt reach the "Flux Capacitor" you ll be fine...........
     
    #2 Repsol Rob, May 22, 2012
  3. Only1Matrixxx

    Only1Matrixxx Active Member

    Joined:
    Feb 22, 2012
    Messages:
    865
    Likes Received:
    256
    Might cause a rattle??
     
    #3 Only1Matrixxx, May 22, 2012
  4. Si.

    Si. God Like

    Joined:
    Jan 25, 2011
    Messages:
    4,852
    Likes Received:
    3,343
    Hehe... but it cant go anywhere can it? Can it?
     
    #4 Si., May 22, 2012
  5. Villan

    Villan Active Member

    Joined:
    Sep 23, 2011
    Messages:
    738
    Likes Received:
    161
    Take it for a blast gun the life out of it and it will be gone.

    I did the same, dropped a bolt in doing the baffle. Then got called away, then forgot about it, weather was crap and I didnt ride for ages. Then went for a spirited ride. Halfway through I remembered what had happened.

    I then took it all off, and there was no sign of it at all, anywhere.............................although I didnt check the flux capacitor :)
     
    #5 Villan, May 22, 2012
  6. dan.1moore1

    dan.1moore1 Senior Member

    Joined:
    Apr 27, 2011
    Messages:
    7,071
    Likes Received:
    1,009
    Must have shot out at 88mph
     
    #6 dan.1moore1, May 22, 2012
    • Like Like x 1

Share This Page