Engine noise

Discussion in 'Maintenance' started by RepsolRuss, Aug 14, 2015.

  1. RepsolRuss

    RepsolRuss Active Member

    Joined:
    Feb 24, 2012
    Messages:
    487
    Likes Received:
    209
    Hi guys

    I've noticed the engine on my bike is getting loud. So loud it sounds like it's gonna throw a rod. The noise is sounding like it's coming from glthe top end. It's quite rattley. The rattle dosn t rise with revs but stays constant even when rise & fall. Bike revs freely without an issue. I originally thought the noise was coming from the air box but after some investigation that turned out to not be the case. I thought the noise was coming from the exhaust system, so removed the system (SBK ti arrow system) and re-fitted with exhaust sealant on the joints. Again, this did nothing.

    If anyone has any ideas/help that would be superb

    :)
     
  2. mikesouthby

    mikesouthby Active Member

    Joined:
    Feb 6, 2014
    Messages:
    167
    Likes Received:
    76
    Russ, have you got a video or recording of the noise? be interested to hear....
     
  3. RepsolRuss

    RepsolRuss Active Member

    Joined:
    Feb 24, 2012
    Messages:
    487
    Likes Received:
    209
    I'll try & get a vid up tmw :)
     
  4. Scott

    Scott Active Member

    Joined:
    Jun 11, 2013
    Messages:
    2,747
    Likes Received:
    448
    Ooooooo refresh time for u
     
  5. RepsolRuss

    RepsolRuss Active Member

    Joined:
    Feb 24, 2012
    Messages:
    487
    Likes Received:
    209
    Took the bike over to my mechanic today. He was saying there isn't anything wrong with it. It's just a noisy engine.

    I have a feeling it may be the exhaust system I've fitted. I'm gonna stick the standard headders on with a can and see if there is a difference
     
  6. jonty

    jonty Active Member

    Joined:
    Sep 5, 2014
    Messages:
    128
    Likes Received:
    42
    ive got a 2010 fireblade with 12k on it fsh and mine needs a cam chain tensioner ,could be your issue buddy,mine has a slight rattle at around 2k rpm,only on over run
     
    • Agree Agree x 1
  7. And7rp2

    And7rp2 Elite Member

    Joined:
    Apr 11, 2011
    Messages:
    1,018
    Likes Received:
    1,074
    As above from me mate, Marions blade was rattling like a good un and new cam chain tensioner has sorted it
     
    • Agree Agree x 1
  8. RepsolRuss

    RepsolRuss Active Member

    Joined:
    Feb 24, 2012
    Messages:
    487
    Likes Received:
    209
    Took the bike over to my mechanic the other day he said there wasn't anything wrong with it..... I'm still sure there is tbh... The bike has only covered approx 6,000 miles. Not sure the cam chain tensioner would of worn that quickly tbh

    It's defo noisy!!
     
  9. And7rp2

    And7rp2 Elite Member

    Joined:
    Apr 11, 2011
    Messages:
    1,018
    Likes Received:
    1,074
    My 10' plate blade only had 2000 miles and the cct failed
     
    • Optimistic Optimistic x 1
  10. mikesouthby

    mikesouthby Active Member

    Joined:
    Feb 6, 2014
    Messages:
    167
    Likes Received:
    76
    My original CCT went at around 19k, the replacement is on its way too 7k miles later. Honda seem to buy them from the local cheese factory...
     
  11. Jimbo Vills

    Jimbo Vills God Like

    Joined:
    Oct 7, 2011
    Messages:
    9,877
    Likes Received:
    6,654
    Normally they go anything around 8-12k from what I've seen. Mine been on way out... Last time I fired it up sounded like a bag of shite!! Settled down when warm....

    Even went up a fair bit on noise test!!
     
  12. Jimbo Vills

    Jimbo Vills God Like

    Joined:
    Oct 7, 2011
    Messages:
    9,877
    Likes Received:
    6,654
    :D
     
    • Funny Funny x 1
  13. Dave V

    Dave V Elite Member

    Joined:
    Jan 5, 2012
    Messages:
    2,345
    Likes Received:
    1,865
    My CCT was replaced at just under 8k, the replacement has covered around 15k and seems fine.
     
  14. Swiss T

    Swiss T Active Member

    Joined:
    Feb 22, 2012
    Messages:
    680
    Likes Received:
    346
    Mine has just been replaced at 12k; I fitted an APE but can't seem to set it right!
     
  15. And7rp2

    And7rp2 Elite Member

    Joined:
    Apr 11, 2011
    Messages:
    1,018
    Likes Received:
    1,074
    that was b4 the 'switch' went on :rolleyes: !!
     
    • Funny Funny x 1

Share This Page