I was hoping somebody could shed some light with a problem i'm having lifting my bike with the above named stand, I have it all fitted together and lined up but I cant get the front wheel off the ground. The rear is very high so its a balance issue. Could the problem be that i'm using a 2012 kit but its a 2014 SP I have? They don't do a kit for models after 2012 but I thought the engine mount and the swingarm pivot would be the same. It slides in easy enough but no matter where I position the adaptor plate I cant get the front up. Any suggestions cheers
I'm sure you adjust the threaded rod bit to allow the inclination of the bike to be altered and it will gradually come back level.
I had exactly the same problem with my Warrior stand, but as pointed by Exuptoy, I managed to adjust the inclination with this threaded rod. It was a pain... but after several adjustments the front wheel suddenly lifted. The only remaining issue is the fact that the bike is still leaning to the right, which is bit unnerving especially when moving the bike on the stand.... Allegedly it could be adjusted as well, however I didn't figured out how, as the 'flex' in the stand seems structural, and not the effect of wrong assembly or adjustment '(
Peter, yes its scary the way the bike leans the opposite way. I have tried adjusting the threaded adjustable bar ad well but just cant get it. do you think its because im using a 2012 kit when I have a 2014 SP? I assumed the mounting would be the same! Do you have any photos of your stand on its own? cheers
