Fitting Akrapovic Slip on,lamDa too short. ****PROBLEM SOLVED****

Discussion in 'Mods, Upgrades, Accessories and Products' started by Autopilot, Sep 30, 2016.

  1. Autopilot

    Autopilot Active Member

    Joined:
    Mar 7, 2014
    Messages:
    31
    Likes Received:
    3
    Hey everybody, hope you can help. Purchased Akrapovic slip on 2nd hand (the one with the built in cat and exhaust valve). Attempted to fit today as per instructions and all going well until I found the lamda sensor is not long enough. Have others found this, am I doing something wrong, and/or is there a fix for this?
    Appreciate your help.
    cheers

    Paul.

    *****************PLEASE IGNORE, PROBLEM SOLVED************************
     
    #1 Autopilot, Sep 30, 2016
    Last edited: Sep 30, 2016
  2. Ian E

    Ian E Active Member

    Joined:
    Mar 2, 2013
    Messages:
    1,459
    Likes Received:
    472
    I fitted one to a 2013 and didn't have a problem. I seem to remember the instructions were to cut the cable tie securing the cable before fitting, then cable tie back on after fitting.
     
    #2 Ian E, Sep 30, 2016
  3. Autopilot

    Autopilot Active Member

    Joined:
    Mar 7, 2014
    Messages:
    31
    Likes Received:
    3
    Thanks for the reply Ian; had cut cable ties but still way too short. In the end I went further back and undid some of the places it was routed.
    Really pleased with result, sounds so much better than stock.
     
    #3 Autopilot, Sep 30, 2016

Share This Page