Intake flap

Hello,

I have a 2006 RR6,

And I had the intake flapper done so it stays open but I have put a power commander 3 on the bike takes about 5 attempts to start from cold, but if I close the flap it starts first time.
I have been in touch with Dynojet and they haven't been able to find out what the problem is.

So tonight connected the vacuum pipe back up.

But now when started and in gear when you put a few revs on the flap closes.

So for some reason it's the opposite way now.

I'm sure that prior to removing the pipe and blanking it off you could open the throttle and the flap would open with the engine switched off

Can anyone help with this.

Thanks Tony

 

I removed the whole lot off mine ,,,,, never had an issue with starting

 

If I remove the pc3 it starts first time every time

 

Strange
Can't help with this one , never had anything to do with pc's

 

it looks like a map issue to me

 

I did the flapper mod to mine and had the pc3. Never any starting issues. TBH, I don't think the PC3 did anything. I'd junk it. The flapper mod smooths the bike out.

 

have you plugged in a laptop whilst the bike is running, ie TPS and injector readings are Ok

 

Ok I'll have a look.

Do you know what the readings should be?

 

with the ignition on but engine off the TPS should read 0 to 100%.
if all over the place you have a connection problem, if not reaching 100 you need to calibrate