2017 sp cut out ?

Discussion in 'Maintenance' started by keithg1748, Jul 12, 2022.

  1. keithg1748

    keithg1748 Active Member

    Joined:
    Oct 27, 2013
    Messages:
    934
    Likes Received:
    154
    any ideas ? , went out on the bike everything seemed ok , until i set off in 1st gear hit 10 -11 k revs went up into 2nd then it just died and cut out , i managed to pull over off the road engine light was on , so i turned it off and on it started but would not respond to any throttle , turned it off and on again started it but went straight up to 4k revs so turned it off , anyway it did go back to normal but i turned round and limped it home , could it be summat to do with the battery ? , thanks for any info on this .
     
  2. Wes

    Wes Active Member

    Joined:
    Dec 17, 2019
    Messages:
    215
    Likes Received:
    122
    I don’t think your battery would cause your start up rpm to somehow reach 4k.
    A vacuum leak or tps sensor ? Check for any leaks and do a quick voltage test on your sensor as preliminary checks. Voltage closed 0.5V open 4.5V.
    Best check those figures ! Best of luck mate
     
    • Like Like x 1
  3. keithg1748

    keithg1748 Active Member

    Joined:
    Oct 27, 2013
    Messages:
    934
    Likes Received:
    154
    im guessing there a pig of a job ,
     
  4. Wes

    Wes Active Member

    Joined:
    Dec 17, 2019
    Messages:
    215
    Likes Received:
    122
    Sensor requires multimeter. Not sure where your models located. But when you’re there it’s just a case of measuring the DC voltage. You tube probably help you out if your uncertain but definitely doable mate. If your in there with a meter now is the time to check the cmp sensor. This is the cam pulse sensor, another possible cause.
    Vacuum leak means a tank lift/removal for inspection of the area below.
    Possibly all sounds daunting, but we’ll worth having a go.
     
    • Like Like x 1
  5. keithg1748

    keithg1748 Active Member

    Joined:
    Oct 27, 2013
    Messages:
    934
    Likes Received:
    154
    thanks , i will have a look on my day off work .
     
  6. keithg1748

    keithg1748 Active Member

    Joined:
    Oct 27, 2013
    Messages:
    934
    Likes Received:
    154
    do any of thses make a bit of a noise from the front end when running ?
     
  7. Wes

    Wes Active Member

    Joined:
    Dec 17, 2019
    Messages:
    215
    Likes Received:
    122
    Not really mate, a different tone would make me look at a vacuum leak.
    Has your bike had an exhaust mod done to it ?
     
  8. Wes

    Wes Active Member

    Joined:
    Dec 17, 2019
    Messages:
    215
    Likes Received:
    122
    Not a different pipe but a mod
     
  9. keithg1748

    keithg1748 Active Member

    Joined:
    Oct 27, 2013
    Messages:
    934
    Likes Received:
    154
    a full akra fitted .
     
  10. buz

    buz Active Member

    Joined:
    Jul 3, 2020
    Messages:
    106
    Likes Received:
    28
    Put the display into mechanic mode and check the twist grip angle.
     
  11. keithg1748

    keithg1748 Active Member

    Joined:
    Oct 27, 2013
    Messages:
    934
    Likes Received:
    154
    65 deg twist grip angle and battery voltage 13.1 .
     

Share This Page