These fairings have been bought and sold around this forum a few times but for varying reasons(nothing to do with the quality or finish of the fairings) they seem to be having difficulty finding a permanent home. I bought them for a spare set but due to how they have been used before or originally supplied they do not fit how I am running my bike. So here we go again and hopefully they'll find a good home. They are set of race/trackday fairings for a 2008-2011 blade originally supplied by ANR Performance. the set consists of the following; 1. 2 piece rear seat unit (top and undertray) that uses the original seat pad. 2. 1 Upper nose cone section without screen or air tubes incl all dzus fastners 3. 2 mid section panels incl all dzus fastners 4. 1 belly pan section,which has been cut down (or was supplied like this) to replicate the standard fairing so I assume to allow the fitting of a standard exhaust or race slip on which can be tight with a fully enclosed race bellypan. it has also been slightly cut down(or was supplied like this) to allow the retention of the sidestand 5. 1 tank cover. this apears to be an original item with the 2 infil panels included but the 2 circle honda emblems removed. All the above have been sprayed gloss black and apart from a couple of scatches are in very good condition for a set of track fairings. All mounting holes and points are good apart from one of the tank mounts at the rear (but a flat washer would sort this) They presently have some 'tiger stripped' graphics applied and number boards(which will easily come off with the use of a hairdryer) pics below were supplied by Castrol craig when he owned these. Any questions or if you require pics of the individual items PM me and I'll email you or post up some pics here. I'm just looking to cover some of my costs so I think £200 delivered is still a bargain for someone.
