Fitted Brembo M4 calipers HPK discs Annitori qs (Bluetooth set up one) this is a job I will never do again. Oil and filter Sp seat cowel Still to do Fit super corsa tyres Sent from my iPhone using Tapatalk
And HRC Qat, the standard cables are to far for the new housing by the way Sent from my iPhone using Tapatalk
Standard cables are spot on. The HRC kit from Dobles came with a new housing which was a lot narrower than the existing one. I just used the oe housing with the new tube. It's fine Sent from my iPhone using Tapatalk
For me yes, my bike was a 13 plate. I did have to undo the cables at the throttle body end though, as I was fitting a shifter at the same time it made sense Sent from my iPhone using Tapatalk
Started the spring clean ... as it gets used all year round mostly every spring I strip the bike down for a deep clean and polish ... the road salt this year was dreadful so I've landed up replacing a few little bits but thankfully most of it is already titanium ... Nearly done.
To be fair I do the same and strip of the fairings and give it a good clean up at the start and end of the year
Started getting mine prepared tonight, pain in the arse to work on these bikes lol. Bought a zero gravity corsa on ebay ages ago for a fiver as it has a section snapped. Thought i could glue it back together but i cant see it being strong enough so need to buy a new one plus have a decal made to match the front of the bike. Need to get a brembo rcs on. Can i use the current HEL lines or will i need a new set with different angle banjos? Planning on general tidy up, oil/filter change, debating whether to bite the bullet and stick some m4's on now whilst im fitting the rcs, supersprox +1 rear and renthal -1 front to go on with tsubaki gold chain, speedohealer to buy plus due its first MOT.
Your normal Hel lines will fit but you may need a different threaded banjo bolt Sent from my iPhone using Tapatalk
They will but likely will be a little long. I changed mine for that reason. The banjos are also a different size for M4's.
Mr OCD what is the best method of cleaning up the exhaust? Took mine off tonight as i want to clean everything up before it gets some of that acf 50, heard good things.
Started them all up, like to do it now and again. Already cleaned and polished just waiting for some decent weather. Untitled by (MrB), on Flickr Untitled by (MrB), on Flickr Honda VTR1000 SP2 RC51 by (MrB), on Flickr Untitled by (MrB), on Flickr
Pushed mine into the garage......straight off the delivery van ! Fitted tank pad. Need to nick the missus hairdryer to remove decals etc then next week fit my new SP Engineering carbon can, smaller numberplate then scrub those tyres in.....weather permitting.
