ABS removed.....the light !

Discussion in 'Maintenance' started by mgoode180566, Nov 22, 2018.

Page 3 of 5
  1. dgr

    dgr Active Member

    Joined:
    Nov 28, 2017
    Messages:
    428
    Likes Received:
    177
    Desborough. Lived there all my life.
     
    #41 dgr, Dec 20, 2018
  2. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    somebody has to :D
     
    #42 mgoode180566, Dec 20, 2018
  3. dgr

    dgr Active Member

    Joined:
    Nov 28, 2017
    Messages:
    428
    Likes Received:
    177
    There are worse places. :D
     
    #43 dgr, Dec 20, 2018
  4. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    i cant find the green orange wire on the left plug near the radiator. I found one that is green pink. Any advice?
     
    #44 Zapada, Dec 20, 2018
  5. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    It's orange with green flecks
     
    #45 mgoode180566, Dec 20, 2018
  6. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    On the large square connector
     
    #46 mgoode180566, Dec 20, 2018
  7. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    Is this one? Or the one behind it?
     

    Attached Files:

    #47 Zapada, Dec 20, 2018
  8. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
     

    Attached Files:

    #48 mgoode180566, Dec 20, 2018
  9. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    Can you see I have cut the orange/green wire?

    The clock side is connected to earth, you will find a couple of green wires in the same loom connected together
     
    #49 mgoode180566, Dec 20, 2018
  10. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
     

    Attached Files:

    #50 mgoode180566, Dec 20, 2018
  11. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    Connected to earth
     

    Attached Files:

    #51 mgoode180566, Dec 20, 2018
  12. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    Yes i found it thanks. I will try to cut from the other side of the plug towards the cluster.
     
    #52 Zapada, Dec 20, 2018
  13. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    Have you removed all of the hardware?
     
    #53 mgoode180566, Dec 20, 2018
  14. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    Not yet trying to figure out how to remove the modulator behind the downpipes. Any suggestions?
     
    #54 Zapada, Dec 20, 2018
  15. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    I was stripping all mine off anyway so I removed the radiator and header...be careful of seized studs on the header, I snapped one, a world of pain!
     
    #55 mgoode180566, Dec 20, 2018
  16. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    Nightmare. I read on the abs removal thread that you need to utilise the 2 existing plugs needed to power the starter motor from the abs loom. So to recap i need to perform the removal of the hardware then utilize the plugs and finally modify the front loom for the abs light?
     
    #56 Zapada, Dec 20, 2018
  17. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    That is correct, modify the loom to continue to provide power to started solenoid, cut the wire from the clock and short it to earth and remove all of the junk hardware or only the bits ypu want to remove, that is up to you
     
    #57 mgoode180566, Dec 20, 2018
  18. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    Did the abs light modification today and it worked great. Is it supposed to stay off during initialization once i switch on the bike? Basically now is off all the time.
     
    #58 Zapada, Dec 23, 2018
  19. mgoode180566

    mgoode180566 Active Member

    Joined:
    Mar 5, 2013
    Messages:
    212
    Likes Received:
    65
    I believe my light illuminates for a couple of seconds as the systems initialise, then stays off.

    You connected the orange/green to a green earth wire ?
     
    #59 mgoode180566, Dec 23, 2018
  20. Zapada

    Zapada Active Member

    Joined:
    Dec 18, 2018
    Messages:
    58
    Likes Received:
    7
    Yes i did but mine stays off all the time. I connected the orange green to the thicker green as shown in the picture you have posted previously. However i have removed the abs fuse. I am guessing thats why the light is off. Update: i have plugged in the abs fuse but the light is still off.
    I forgot to mention that i did not remove anything from the abs system. Only the fuse and the brake lines.
     
    #60 Zapada, Dec 23, 2018
    Last edited: Dec 23, 2018
Page 3 of 5

Share This Page